OPTIMAL BS-8342C — OE Compatible Parts

Specifications

Brake Disc Thickness: 9 mm
Centering Diameter: 64 mm
Height: 59 mm
Minimum thickness: 7 mm
Outer Diameter: 282 mm
Fitting Position: Rear Axle
Brake Disc Type: solid
Surface: Coated
Hole Arrangement/Number: 5/10
Weight: 4.675 kg

Vehicle Manufacturers

HONDA(6 items)

HONDA

42510-SCA-E00

HONDA

42510S9A000

HONDA

42510S9AN00

HONDA

42510SMCN00

HONDA

42510SMCN01

HONDA

42510SMCN02

Featured videos

Watch maintenance and replacement tutorials on YouTube.

14:21

How to Replace Brake Pads and Rotors (COMPLETE Guide)

ChrisFix

Watch on YouTube

12:53

How to do a Complete Brake Flush and Bleed

ChrisFix

Watch on YouTube

10:20

Air Brakes Explained Simply :: Service, Parking and Emergency Brakes One & the Same

Smart Drive Test

Watch on YouTube

About this part

A brake disc (rotor) is the metal disc that the brake pads clamp onto to slow the wheel.

When the pads press against the spinning disc, friction converts the vehicle's motion into heat, which the disc dissipates; commercial vehicle discs are large and heat-resistant for high loads and repeated braking.

Mounted at the wheel as part of a disc brake. Because braking is safety critical, discs and pads are inspected on schedule and replaced by axle set by a qualified technician.

Frequently asked questions

Does BS-8342C have compatible (OE) part numbers?

Yes — it is linked to 6 OE-compatible part number(s), shown in the compatible parts section above.

BS-8342C

Specifications

Vehicle Manufacturers

HONDA(6 items)

Other brands compatible with the same OE

How to Replace Brake Pads and Rotors (COMPLETE Guide)

How to do a Complete Brake Flush and Bleed

Air Brakes Explained Simply :: Service, Parking and Emergency Brakes One & the Same

About this part

Frequently asked questions