12:53Image pending
DDF2047C-1
Brake disc
Specifications
- Brake Disc Thickness
- 30 mm
- Centering Diameter
- 75 mm
- Height
- 66 mm
- Minimum thickness
- 28.4 mm
- Outer Diameter
- 348 mm
- Brake Disc Type
- Vented
- Supplementary Article/Supplementary Info 2
- with bolts/screws
- Bolt Hole Circle Ø
- 120
- Number of mounting bores
- 1
- Number of Holes
- 5
- Quantity Unit
- Piece
- Surface
- Coated
- Test Mark
- R90 Homologated
- Weight
- 12.4
- Container Type
- Box
- Bore Diameter 2
- 16.5
- Packaging length
- 35
- Packaging width
- 35
- Packaging height
- 7
Vehicle Manufacturers
BMW(1 items)
BMW
34116775277
Other brands compatible with the same OE
18 total
A.B.S.
18261
Brake disc
A.B.S.
18657
Brake disc
ABE
C3B040ABE
Brake disc
ABE
C3B040ABE-P
Brake disc
ASHIKA
60-00-0131C
Brake disc
BREMBO
09.C409.13
Brake disc
HELLA PAGID
8DD 355 120-651
Brake disc
JAPANPARTS
DI-0131C
Brake disc
JURID
562679JC-1
Brake disc
LPR
B2070V
Brake disc
LPR
B2070VBR
Brake disc
MAGNETI MARELLI
360406131304
Brake disc
MAGNETI MARELLI
361302040804
Brake disc
OPTIMAL
BS-9318HC
Brake disc
REMSA
61549.10
Brake disc
ROADHOUSE
61549.10
Brake disc
TEXTAR
92265725
Brake disc
VALEO
672983
Brake disc
Featured videos
Watch maintenance and replacement tutorials on YouTube.
12:53
9:44CDL Class A FULL In Cab Inspection and Air Brake Test 2023 - Pass Your CDL Trucking Road Test
Driving Academy | CDL Truck Driving School
Watch on YouTube
5:57About this part
A brake disc (rotor) is the metal disc that the brake pads clamp onto to slow the wheel.
When the pads press against the spinning disc, friction converts the vehicle's motion into heat, which the disc dissipates; commercial vehicle discs are large and heat-resistant for high loads and repeated braking.
Mounted at the wheel as part of a disc brake. Because braking is safety critical, discs and pads are inspected on schedule and replaced by axle set by a qualified technician.
Frequently asked questions
Does DDF2047C-1 have compatible (OE) part numbers?
Yes — it is linked to 1 OE-compatible part number(s), shown in the compatible parts section above.