5:57Image pending
ATE
24.0124-0103.1
Brake disc
Specifications
- Brake Disc Thickness
- 24.0 mm
- Centering Diameter
- 76.0 mm
- Height
- 53.5 mm
- Inner Diameter
- 105.0 mm
- Minimum thickness
- 22.0 mm
- Outer Diameter
- 252.5 mm
- Brake Disc Type
- Vented
- Surface
- Coated
- Number of Holes
- 6
- Bolt Hole Circle Ø
- 95.0
- Thread Size
- M10x1,5
- Test Mark
- E1 90R-02C0115/0378
- Weight
- 7.877 kg
Vehicle Manufacturers
RENAULT(2 items)
RENAULT
77 00 561 367
RENAULT
77 01 204 281
OPEL(2 items)
OPEL
44 03 283
OPEL
9111283
VAUXHALL(2 items)
VAUXHALL
44 03 283
VAUXHALL
9111283
Other brands compatible with the same OE
21 total
A.B.S.
15106
Brake disc
ASHIKA
60-00-0718
Brake disc
ASHIKA
60-00-0718C
Brake disc
BOSCH
0 986 478 113
Brake disc
BREMBO
09.3357.10
Brake disc
DELPHI
BG2284
Brake disc
FERODO
DDF160
Brake disc
HELLA
8DD 355 100-331
Brake disc
HELLA PAGID
8DD 355 100-331
Brake disc
JAPANPARTS
DI-0718
Brake disc
JAPANPARTS
DI-0718C
Brake disc
JURID
561171JC
Brake disc
LPR
R1041V
Brake disc
MAGNETI MARELLI
360406041900
Brake disc
MINTEX
MDC222
Brake disc
NK
203905
Brake disc
REMSA
6157.10
Brake disc
ROADHOUSE
6157.10
Brake disc
TEXTAR
92017203
Brake disc
TRW
DF1002
Brake disc
VALEO
186218
Brake disc
Featured videos
Watch maintenance and replacement tutorials on YouTube.
5:57
14:21
10:20Air Brakes Explained Simply :: Service, Parking and Emergency Brakes One & the Same
Smart Drive Test
Watch on YouTubeAbout this part
A brake disc (rotor) is the metal disc that the brake pads clamp onto to slow the wheel.
When the pads press against the spinning disc, friction converts the vehicle's motion into heat, which the disc dissipates; commercial vehicle discs are large and heat-resistant for high loads and repeated braking.
Mounted at the wheel as part of a disc brake. Because braking is safety critical, discs and pads are inspected on schedule and replaced by axle set by a qualified technician.
Frequently asked questions
Does 24.0124-0103.1 have compatible (OE) part numbers?
Yes — it is linked to 6 OE-compatible part number(s), shown in the compatible parts section above.